Welcome to the Remote Controller description of the Gladius Mini Underwater Drone. Below is a detailed description of what features are on the Gladius Mini Remote Controller

           Remote Controller Description

  • The remote controller is used to control the drone. It connects wirelessly via Bluetooth to your mobile phone/tablet. The remote controller's phone/tablet mount supports devices ranging from 5 inches to 10.5 inches.
  • The Gladius Mini Remote Controller features include the following
  • The Gladius Mini Remote Control comes equipped with an on/off switch that is set in the middle of the remote control
  • The Gladius Mini Remote Control comes equipped with a mode switch press the button to switch between depth-lock & self-stabilizing modes. This button is on the top left of the remote control face.
  • The Gladius Mini Remote Control comes equipped with Bluetooth indicator light. When the light is solid blue this means Bluetooth is connected. When the light flashes it's not connected.
  • The Gladius Mini Remote Control comes equipped with a power indicator, Each LED represents 25% of the controller's battery.  To check the charging progress turn the remote control on while charging. When all four lights are lit up the battery is fully charged.
  • The Gladius Mini Remote Control comes equipped with an Unlock and Unlock button: This button is used to Unlock and Lock the motors. This button is on the top right of the remote control face.
  • The Gladius Mini Remote Control comes equipped with a lanyard attachment: If desired, a safety lanyard can be attached to this hoop to prevent the controller from falling.
  • The Gladius Mini Remote Control comes equipped with Joysticks these are used to control the navigation of the drone. The Joysticks are located in the middle of the remote face.
  • The Gladius Mini Remote Control comes equipped with a button to switch between Video and Photo Mode. Press the button on the top left of the remote to switch between video and photo mode.
  • The Gladius Mini Remote Control comes equipped with a button to start and stop Video/Photo. Press the button on the top right of the remote to start/stop video recording or take a photo
  • The Gladius Mini Remote Control comes equipped with a dial to set LED Light Control: Scroll right/left to increase/decrease the brightness of LED lights. This dial is located on the top left side of the remote control
  • The Gladius Mini Remote Control comes equipped with 45° Angle Adjustment: Scroll right/left to raise/lower the head of the drone. Press dial down to return to the horizontal position. This dial is located on the top right side of the remote control